Product Center

Ventilation & Accessories

Explore Vantell building envelope products through the complete system hierarchy.

Product Center

Ventilation & Accessories

63 products

SUS-series

SUS-series appearance is accepted by the public. It's inside design with ouver blade and insect screen to avoid birds and rodents. Material: Stainless steel 304/2B

View product ↗

Wall Vent

SV-series

The SV-series appearance is the same as SUS-series.It's inside design with stainless steel insect screen,the large opening to easy eliminate clogging.

View product ↗

Wall Vent

SUC-series

The SUC-series like the appearance of SUS-series,the inside structure is the same as SUA-series, to offer anti draught cowl attachment to prevent return air.

View product ↗

Wall Vent

SUA/GUA -series

The SUA/GUA series have a best advantage is to offer anti draught cowl attachment for extra draught resistance and resist water from entering stove pipe.

View product ↗

Wall Vent

SMS-series

The SMS series offer deflective shutter type help control back-draft and resist water from entering stove pipe. Material: Stainless steel 304/2B

View product ↗

Wall Vent

SUL-series

SUL-series with fixed louvers is bigger and stronger to a help air quickly flow.The design is weatherproof. The tube body have a removable stainless steel mesh.The mesh is installed to keep out rodents.

View product ↗

Wall Vent

SSE/ASE-series

SSE/ASE apply to quadrate pipe,the fixed louver structure fastness and durable,to help air quickly flow .

View product ↗

Wall Vent

SSDF/ASDF-series

SSDF-series material is stainless steel,ASDA-series material is aluminum.The fixed louver help air quickly flow,easy to install, to design sheet structure to fit close to the wall.

View product ↗

Wall Vent

SSDA/ASDA-series

SSDA/ASDA-series major characteristic is a part in the middle to adjust air flow, the air flow can adjust range from zero to the biggest by the part. This vent can be installed on the door.

View product ↗

Wall Vent

SED-series

SED-series with fixed louvers help air quickly flow.The various sizes are available for different locations to be choosen optionally. The concise appearance, easy to install.

View product ↗

Wall Vent

SUG-series

SUG-series is suitable for covering wall or ceiling openings and ducting vents to keep indoor and outdoor air circulation. Installed in the air outlet of corridor to save space. Its insect screen can prevent the pest int

View product ↗

Wall Vent

SCS-series

SCS-series is easy installed to fit close to the wall.The appearance is simple and elegant. Designed to cover wall or ceiling openings and ducting vents.

View product ↗

Wall Vent

SUE-series

SUE-series production process is complex.By adopting whole shaped technology,no welding, the product has the characteristic of high intensity and durability. The louver is in the concave part to reduce the risk of deform

View product ↗

Wall Vent

SUH-series

SUH-series is lager opening louver to help air quickly flow. Its insect screen can prevent the pest into the room.Designed to cover any wall or ceiling ducting vents.

View product ↗

Wall Vent

SUK-series

SUK-series design is modern.The raised sections have louvers to keep indoor and outdoor air quickly circulation.Designed to cover any wall ducting vents.

View product ↗

Wall Vent

LMA-series

LMA-series is our specially designed. It's the retro style both beautify wall and ventilation function.

View product ↗

Wall Vent

AIE-series

AIE-series various sizes can meet all kinds of requirement about ducting vents to be chosen optionally.

View product ↗

Roofing Flashing

Pipe Flashing

Pipe Flashing is made of aluminum and galvanized steel. The product model start with G is galvanized steel with high zinc layer. The product model start with A is aluminum.

View product ↗

Undereave vent

GTV-series

This eave vents are installed on open soffit structures at the eaves or overhang.Eave vents are intake vents used in a balanced attic room ventilation system.The material is galvanized steel.Easy install.The four corner

View product ↗

Undereave vent

GSB-series

GSB-series material is galvanized steel. Gable Vent is with Front Flange. Galvanized steel will not burn and thus is an important element in fire resistant construction. The wide louver can provide excellent air flow avo

View product ↗

Gable Louvers

GSC-series

GSC-series material is galvanized steel. Gable Vent is with Stucco Flange. The structure is fastness and durable.Adequate ventilation help reduce moisture to make keep the room fresh and clean .

View product ↗

Undereave vent

CV-series

This undereave vent is rectangle.The material is aluminum.Surface is spray treatment.

View product ↗

Undereave vent

ASE-series

This undereave vent is circle.The material is aluminum.Surface is spray treatment.

View product ↗

Undereave vent

SAB-series

This vents material is stainless steel. The grid design can avoid birds or rodents to bite or come in the room.To provide critical intake ventilation at hard to ventilate or other restricted areas. The various sizes can

View product ↗

Undereave vent

CUV-series

This vents material is aluminum.Aluminum will not burn and thus is an important element in fire resistant construction.

View product ↗

Undereave vent

XEZV-series

This vents material is aluminum.Aluminum will not burn and thus is an important element in fire resistant construction.

View product ↗

Foundation vent

GLV-series

This foundation vent material is galvanized steel.Easy to install.The four corner on flange have nailing guides to fit close to the sidewall.The louvers deflect rain or snow.The insect screen can avoid large insects come

View product ↗

Foundation vent

GLVB-series

This foundation vent material is galvanized steel.Easy to install.

View product ↗

Gable Louvers

ASA/GSA-series

The first alphabet of model is "A",the material is aluminium..The first alphabet of model is "G",the material is galvanized steel.The end of model is without alphabet,the colour is metallic colour.The end of model is "w"

View product ↗

Diffuser vent

SUB-series

SUB-series material is stainless steel 304/2B. The high quality material is more durable. Adjustable air volume. Easy to install, not easy to fall off. It can be used for indoor exhaust,lower noise,and also can be used a

View product ↗

Accessories

ABL/GBL-series

The first alphabet of model is "A",the material is aluminium..The first alphabet of model is "G",the material is galvanized steel.ABL/GBL-series with one side flange can be fixed in the pipe.The butterfly shutter is used

View product ↗

Accessories

SME-series

SME-series is stainless steel mesh.The good antirust property.Easy to install.SME-series can be directly installed on tube body to avoid insects to come in the room.

View product ↗

Accessories

ABI/GBI-series

The first alphabet of model is "A",the material is aluminium..The first alphabet of model is "G",the material is galvanized steel.ABI/GBI-series with two sides flange can be fixed in the middle of pipe.The butterfly shut

View product ↗

Vent Strip

VSZ12-1

Starter/bottom course for both lap siding and vertical siding.perforated holes allow any mositure building up behind the siding panels to weep out while preventing pests from entering.

View product ↗

Vent Strip

VSZ34-1

Starter/bottom course for both lap siding and vertical siding.perforated holes allow any mositure building up behind the siding panels to weep out while preventing pests from entering.

View product ↗

Exterior Wall Siding Aluminum Flashing

Double layer siding outside corner flashing

A traditional outside corner without the joints, caulked seams and nail holes that butted 1x4s require.

View product ↗

Exterior Wall Siding Aluminum Flashing

Double layer siding inside corner flashing

Design authentically duplicates the look of a wood corner piece without the maintenance headaches. Eliminates wood inside corner piece that will split/rot over time.

View product ↗

Exterior Wall Siding Aluminum Flashing

Single layer siding upper flashing

Provides a clean finish at openings, edges of panels or planks and at material transitions.

View product ↗

Exterior Wall Siding Aluminum Flashing

Single layer siding below flashing

Starter/bottom course for both vertical and lap siding. Provides ease-of-installation with correct angle.

View product ↗

Exterior Wall Siding Aluminum Flashing

Siding "L" Transtion Trim flashing

Design for facade / soffit transition with an appearance complementary to the vertical reveal.

View product ↗

Exterior Wall Siding Aluminum Flashing

Window/Head Flashing

Provides an easy to install and long-lasting method of minimizing water penetration. Used over window trim, band boards, panel intersections, and other vertical surfaces.

View product ↗

Metal Flashing

Angle/Base Flashing

Efficient wall to roof application. Protects against leaks at walls and chimneys to roof connections.

View product ↗

Metal Flashing

Window Flashing

Galvanized Window Flashing provides an inexpensive and easy to install method of stopping water penetration behind siding.

View product ↗

Metal Flashing

Z Flashing

Z flashing provide a cost-effective and convenient installation method to prevent water enter clapboard, material is 0.25mm galvanized sheet, American standard high zinc layer.

View product ↗

Metal Flashing

Kick Out Flashing

Kick out flashing is used where a lower roofline terminates against a vertical wall. The kick out is installed above the rain gutter or drip edge where the roof meets a vertical wall. It kicks out rain water and diverts

View product ↗

Metal Flashing

Proline Plank Flash

Best practices solution tested and proven to reduce moisture penetration behind the joint where two planks butt together and drain water over the top edge of the last full course of siding. The design allows for quick an

View product ↗

Connectors

Structural parts

For quick, easy installation between plywood panels for roof sheathing or panelized construction. This product provides structural support, reduce normal plywood deflection between panels.

View product ↗

Connectors

Hurricane Strap

SS Series provide the builder with a complete range of tie straps to meet a variety of application and design load conditions and specifications.

View product ↗

Connectors

Wall Bracing

(WB & WBT Series) We recommend metal bracing only be used to serve as temporary bracing to prevent racking before structural sheathing is applied.

View product ↗

Connectors

Coil Strap

Coiled strapping consists of continuous coils which are designed to be cut to length on the job as required. No need to order 10", 18" or 24" straps, etc. Staggered hole pattern reduces wood splitting.

View product ↗

Undereave vent

XSV-series

This vents material is aluminum.Aluminum will not burn and thus is an important element in fire resistant construction. This vents design is specially and variety for double leg channel to apply for all kinds of soffit a

View product ↗

Undereave vent

CUVP-series

View product ↗

Undereave vent

ASB-series

This undereave vent is rectangle.The material is aluminum.Surface is spray treatment. The end of model is without alphabet,the colour is metallic colour.The end of model is "w".the colour is white.The end of model is "B"

View product ↗

Undereave vent

ASC-series

View product ↗

Metal Flashing

Step Flashing

Model： Step Flashing FS448/FS6610 Technical Data: It has several applications. including chimney and skylight water retaining, pre-cut, easy to use, material is 0.25mm galvanized sheet, American standard high zinc layer.

View product ↗

Nail

Product Model: Big hat nail

View product ↗

Gasket

A Vantell ventilation, trim or accessory product for exterior building envelope applications.

View product ↗

Sealant

A Vantell ventilation, trim or accessory product for exterior building envelope applications.

View product ↗

Ridge Vent

Model： Vantell @ RidgeVent VRV1250 Product Introduction: To install on the roof ridge, hidden under the roof tile, and communicate with the eave air vent. Remove moisture from the triangle area of the roof.Maintain close

View product ↗

Ventilation & Accessories